Frigidaire Washer E11 Error Code: What It Means & How to Fix It

E11 = Fill time too long. E11 on Frigidaire front-loaders means it took too long to fill. Check the faucets, the hoses and the drain hose setup, because a misinstalled drain hose can siphon water out as it fills.

Can you fix it yourself? Yes

Check your model: Error codes can mean different things on different Frigidaire models. Find your model number (usually on a sticker inside the door or lid, or on the back) and confirm the code in your user manual.

Safety first: Unplug the appliance (or switch off its breaker) before you remove panels, filters or hoses. Turn off the water supply valves before you disconnect any hose, and keep a towel and shallow pan handy. Never work on wiring, gas lines or sealed refrigerator systems yourself.

Quick checks (2 minutes)

Faucets fully open?
Frozen lines in winter?

How to fix Frigidaire Washer E11

Open both faucets fully.
Unplug, disconnect the fill hoses and check water flows through them.
Check the drain hose installation, since a bad setup siphons out fill water.
Sears PartsDirect advises replacing the inlet valve if the screens are clogged rather than cleaning them, because debris can make the valve stick open and flood.

Still showing E11?

If flow is fine, the water inlet valve likely needs replacing.

Likely part if the basics don't fix it:

Affiliate notice: links to Amazon below are affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you.

Check price on Amazon: washer water inlet valve

Repair or replace?

If the appliance is under warranty, call Frigidaire first, since a repair may be free. Out of warranty, a common rule of thumb is to compare the repair quote with the cost of a new unit and the appliance's age before deciding.

Want a pro to handle it?

Get free quotes from local appliance repair technicians.

Repair quote requests are coming soon. In the meantime, search for a local appliance repair technician.

FAQ

Should I clean clogged inlet screens?

Sears PartsDirect recommends replacing the valve assembly instead, because cleaning can push debris into the valve.

Verification note: Not verified on frigidaire.com; source is Sears PartsDirect (reputable parts retailer).

Source

Code meaning and official steps from: https://www.searspartsdirect.com/diy/error-codes/washer-repair/1234598/frigidaire-front-load-washer/1428. Last verified 2026-10-21.